 |
AMO-Tools-Suite
v.0.9.0
Set of tools for calculating energy efficiency in industrial equipment
|
|
AMO-Tools-Suite
v.0.9.0
Set of tools for calculating energy efficiency in industrial equipment
|
| ▼ _CPack_Packages | |
| ► Darwin | |
| ► STGZ | |
| ► amo_tools_suite--Darwin-x86_64 | |
| ► amo_tools_suite | |
| ► include | |
| ► calculator | |
| ► furnace | |
| EfficiencyImprovement.h | Calculator for fuel fired furnace |
| EnergyEquivalency.h | Calculator for energy equivalency for electric and fuel-fired furnaces |
| FlowCalculationsEnergyUse.h | Calculator for flow calculations energy use for fuel-fired furnaces |
| HumidityRatio.h | Calculator for the humidity ratio |
| O2Enrichment.h | Calculator for fuel fired furnace |
| ► losses | |
| Atmosphere.h | Calculator for heat required for atmosphere |
| AuxiliaryPower.h | Calculator for auxiliary power usage |
| EnergyInputEAF.h | Calculator for heat loss in an Electric Arc Furnace (EAF) |
| EnergyInputExhaustGasLosses.h | Calculator for energy input - exhaust gas losses for a non-EAF electric furnace |
| ExhaustGasEAF.h | Calculator for gas exhaust losses in an Electric Arc Furnace (EAF) |
| FixtureLosses.h | Calculator for heat loss due to fixtures, trays, conveyors |
| GasCoolingLosses.h | Calculator for total energy loss for gas, including air |
| GasFlueGasMaterial.h | Calculator for flue gas heat losses |
| GasLoadChargeMaterial.h | Calculator for total heat of gas load/charge material |
| LeakageLosses.h | Calculator for total energy loss for gas leakages |
| LiquidCoolingLosses.h | Calculator for heat losses due to liquid (not water) cooling |
| LiquidLoadChargeMaterial.h | Calculator for total heat of liquid load/charge material |
| LoadChargeMaterial.h | |
| OpeningLosses.h | Calculator for opening heat losses |
| SlagOtherMaterialLosses.h | Calculator for heat required for slag - other material losses |
| SolidLiquidFlueGasMaterial.h | |
| SolidLoadChargeMaterial.h | Calculator for total heat of solid load/charge material |
| WallLosses.h | Calculator for wall heat losses |
| WaterCoolingLosses.h | Calculator for heat losses due to water cooling |
| ► motor | |
| EstimateFLA.h | |
| MotorCurrent.h | |
| MotorData.h | |
| MotorEfficiency.h | |
| MotorPower.h | |
| MotorPowerFactor.h | |
| MotorShaftPower.h | MotorShaftPower class This contains the prototypes for the MotorShaftPower |
| OptimalMotorPower.h | |
| OptimalMotorShaftPower.h | |
| OptimalMotorSize.h | |
| Poles.h | |
| ► processHeat | |
| AirHeatingUsingExhaust.h | |
| ► pump | |
| FluidPower.h | |
| HeadTool.h | |
| MoverEfficiency.h | |
| OptimalDeviationFactor.h | |
| OptimalPrePumpEff.h | |
| OptimalPumpEfficiency.h | |
| OptimalPumpShaftPower.h | |
| OptimalSpecificSpeed.h | |
| OptimalSpecificSpeedCorrection.h | |
| PumpData.h | |
| PumpShaftPower.h | |
| ► util | |
| ► insulation | |
| ► objects | |
| AirProperties.h | |
| ► pipes | |
| InsulatedPipeCalculator.h | |
| InsulatedPipeInput.h | |
| InsulatedPipeOutput.h | |
| ► services | |
| ConvectiveHeatTransferCoefficient.h | |
| NusseltNumber.h | |
| RadiativeHeatTransferCoefficient.h | |
| RayleighNumber.h | |
| ReynoldsNumber.h | |
| ThermalResistance.h | |
| ► tanks | |
| InsulatedTankCalculator.h | |
| InsulatedTankInput.h | |
| InsulatedTankOutput.h | |
| AnnualCost.h | |
| AnnualEnergy.h | |
| CHP.h | |
| CompressedAir.h | |
| CompressedAirCentrifugal.h | |
| CompressedAirLeakSurvey.h | |
| CompressedAirPressureReduction.h | |
| CompressedAirReduction.h | |
| Conversion.h | |
| CurveFitVal.h | |
| ElectricityReduction.h | |
| NaturalGasReduction.h | |
| SludgeVolumeIndex.h | |
| SteamReduction.h | |
| WaterReduction.h | |
| ► chillers | |
| CoolingTower.h | |
| ► fans | |
| CompressibilityFactor.h | |
| Fan203.h | |
| FanCurve.h | Calculator for Fan Curve Contains the calculator for the Fan Curve |
| FanEnergyIndex.h | |
| FanShaftPower.h | |
| OptimalFanEfficiency.h | |
| Planar.h | |
| ► fast-cpp-csv-parser | |
| csv.h | |
| ► results | |
| InputData.h | |
| Results.h | Function prototypes for the PSAT and FSAT result fields |
| ► sqlite | |
| AtmosphereSpecificHeatData.h | |
| GasFlueGasMaterialData.h | |
| GasLoadChargeMaterialData.h | |
| LiquidLoadChargeMaterialData.h | |
| MotorData.h | |
| PumpData.h | |
| SolidLiquidFlueGasMaterialData.h | |
| SolidLoadChargeMaterialData.h | |
| SQLite.h | |
| sqlite3.h | |
| WallLossesSurfaceData.h | |
| ► ssmt | |
| ► api | |
| BoilerInput.h | |
| HeaderInput.h | |
| OperationsInput.h | |
| SteamModeler.h | |
| SteamModelerInput.h | |
| SteamModelerOutput.h | |
| TurbineInput.h | |
| ► domain | |
| BoilerFactory.h | |
| DeaeratorFactory.h | |
| EnergyAndCostCalculationsDomain.h | |
| FlashTankFactory.h | |
| FluidPropertiesFactory.h | |
| HeaderFactory.h | |
| HeatLossFactory.h | |
| HighPressureHeaderCalculationsDomain.h | |
| HighToMediumSteamTurbineCalculationsDomain.h | |
| InletFactory.h | |
| LowPressureFlashedSteamIntoHeaderCalculatorDomain.h | |
| LowPressureHeaderCalculationsDomain.h | |
| LowPressureVentedSteamCalculationsDomain.h | |
| MakeupWaterAndCondensateHeaderCalculationsDomain.h | |
| MakeupWaterVolumeFlowCalculationsDomain.h | |
| MediumPressureHeaderCalculationsDomain.h | |
| PowerBalanceCheckerCalculationsDomain.h | |
| ProcessSteamUsageCalculationsDomain.h | |
| PrvWithDesuperheatingFactory.h | |
| PrvWithoutDesuperheatingFactory.h | |
| ReturnCondensateCalculationsDomain.h | |
| SteamModelCalculationsDomain.h | |
| SteamModelerOutputFactory.h | |
| TurbineFactory.h | |
| ► service | |
| ► energy_and_cost | |
| EnergyAndCostCalculator.h | |
| ► high_pressure_header | |
| CondensingTurbineCalculator.h | |
| HighPressureCondensateCalculator.h | |
| HighPressureFlashTankCalculator.h | |
| HighPressureHeaderCalculator.h | |
| HighPressureHeaderModeler.h | |
| HighToLowSteamTurbineCalculator.h | |
| HighToMediumSteamTurbineCalculator.h | |
| ► low_pressure_header | |
| LowPressureCondensateCalculator.h | |
| LowPressureFlashedSteamIntoHeaderCalculator.h | |
| LowPressureHeaderCalculator.h | |
| LowPressureHeaderModeler.h | |
| LowPressurePrvCalculator.h | |
| ► medium_pressure_header | |
| HighToMediumPrvCalculator.h | |
| MediumPressureCondensateCalculator.h | |
| MediumPressureHeaderCalculator.h | |
| MediumPressureHeaderModeler.h | |
| MediumToLowPressureTurbineCalculator.h | |
| ReducedSteamException.h | |
| SteamBalanceCheckerService.h | |
| UnableToBalanceException.h | |
| ► power_balance | |
| LowPressureVentedSteamCalculator.h | |
| PowerBalanceChecker.h | |
| SteamBalanceCalculator.h | |
| SteamProductionCalculator.h | |
| SteamUseCalculator.h | |
| ► process_steam_usage | |
| ProcessSteamUsageModeler.h | |
| ► water-and-condensate | |
| MakeupWaterVolumeFlowCalculator.h | |
| ► water_and_condensate | |
| CombinedCondensateCalculator.h | |
| HeatExchangerCalculator.h | |
| MakeupWaterAndCondensateHeaderCalculator.h | |
| MakeupWaterAndCondensateHeaderModeler.h | |
| MakeupWaterCalculator.h | |
| MakeupWaterMassFlowCalculator.h | |
| ReturnCondensateCalculator.h | |
| DeaeratorModeler.h | |
| EnergyFlowCalculator.h | |
| MassFlowCalculator.h | |
| PrvCalculator.h | |
| RestarterService.h | |
| SteamBalanceException.h | |
| SteamModelCalculator.h | |
| SteamModelRunner.h | |
| SteamReducer.h | |
| TurbineCalculator.h | |
| Boiler.h | Calculator for boiler |
| Deaerator.h | Calculator for the deaerator for steam systems |
| FlashTank.h | Calculator for the flash tank for steam systems |
| Header.h | |
| HeatExchanger.h | |
| HeatLoss.h | Calculator for the heat loss for steam systems |
| PRV.h | Calculator for the steam properties after after a pressure drop for steam systems |
| SaturatedProperties.h | Calculator for saturated properties for steam systems |
| SteamProperties.h | |
| SteamSystemModelerTool.h | |
| Turbine.h | Calculator for turbines for steam systems |
| ► wasteWater | |
| WasteWater_Treatment.h | Contains the class definition for Bio-Tiger waste water treatment simulation |
| ► TGZ | |
| ► amo_tools_suite--Darwin-x86_64 | |
| ► amo_tools_suite | |
| ► include | |
| ► calculator | |
| ► furnace | |
| EfficiencyImprovement.h | Calculator for fuel fired furnace |
| EnergyEquivalency.h | Calculator for energy equivalency for electric and fuel-fired furnaces |
| FlowCalculationsEnergyUse.h | Calculator for flow calculations energy use for fuel-fired furnaces |
| HumidityRatio.h | Calculator for the humidity ratio |
| O2Enrichment.h | Calculator for fuel fired furnace |
| ► losses | |
| Atmosphere.h | Calculator for heat required for atmosphere |
| AuxiliaryPower.h | Calculator for auxiliary power usage |
| EnergyInputEAF.h | Calculator for heat loss in an Electric Arc Furnace (EAF) |
| EnergyInputExhaustGasLosses.h | Calculator for energy input - exhaust gas losses for a non-EAF electric furnace |
| ExhaustGasEAF.h | Calculator for gas exhaust losses in an Electric Arc Furnace (EAF) |
| FixtureLosses.h | Calculator for heat loss due to fixtures, trays, conveyors |
| GasCoolingLosses.h | Calculator for total energy loss for gas, including air |
| GasFlueGasMaterial.h | Calculator for flue gas heat losses |
| GasLoadChargeMaterial.h | Calculator for total heat of gas load/charge material |
| LeakageLosses.h | Calculator for total energy loss for gas leakages |
| LiquidCoolingLosses.h | Calculator for heat losses due to liquid (not water) cooling |
| LiquidLoadChargeMaterial.h | Calculator for total heat of liquid load/charge material |
| LoadChargeMaterial.h | |
| OpeningLosses.h | Calculator for opening heat losses |
| SlagOtherMaterialLosses.h | Calculator for heat required for slag - other material losses |
| SolidLiquidFlueGasMaterial.h | |
| SolidLoadChargeMaterial.h | Calculator for total heat of solid load/charge material |
| WallLosses.h | Calculator for wall heat losses |
| WaterCoolingLosses.h | Calculator for heat losses due to water cooling |
| ► motor | |
| EstimateFLA.h | |
| MotorCurrent.h | |
| MotorData.h | |
| MotorEfficiency.h | |
| MotorPower.h | |
| MotorPowerFactor.h | |
| MotorShaftPower.h | MotorShaftPower class This contains the prototypes for the MotorShaftPower |
| OptimalMotorPower.h | |
| OptimalMotorShaftPower.h | |
| OptimalMotorSize.h | |
| Poles.h | |
| ► processHeat | |
| AirHeatingUsingExhaust.h | |
| ► pump | |
| FluidPower.h | |
| HeadTool.h | |
| MoverEfficiency.h | |
| OptimalDeviationFactor.h | |
| OptimalPrePumpEff.h | |
| OptimalPumpEfficiency.h | |
| OptimalPumpShaftPower.h | |
| OptimalSpecificSpeed.h | |
| OptimalSpecificSpeedCorrection.h | |
| PumpData.h | |
| PumpShaftPower.h | |
| ► util | |
| ► insulation | |
| ► objects | |
| AirProperties.h | |
| ► pipes | |
| InsulatedPipeCalculator.h | |
| InsulatedPipeInput.h | |
| InsulatedPipeOutput.h | |
| ► services | |
| ConvectiveHeatTransferCoefficient.h | |
| NusseltNumber.h | |
| RadiativeHeatTransferCoefficient.h | |
| RayleighNumber.h | |
| ReynoldsNumber.h | |
| ThermalResistance.h | |
| ► tanks | |
| InsulatedTankCalculator.h | |
| InsulatedTankInput.h | |
| InsulatedTankOutput.h | |
| AnnualCost.h | |
| AnnualEnergy.h | |
| CHP.h | |
| CompressedAir.h | |
| CompressedAirCentrifugal.h | |
| CompressedAirLeakSurvey.h | |
| CompressedAirPressureReduction.h | |
| CompressedAirReduction.h | |
| Conversion.h | |
| CurveFitVal.h | |
| ElectricityReduction.h | |
| NaturalGasReduction.h | |
| SludgeVolumeIndex.h | |
| SteamReduction.h | |
| WaterReduction.h | |
| ► chillers | |
| CoolingTower.h | |
| ► fans | |
| CompressibilityFactor.h | |
| Fan203.h | |
| FanCurve.h | Calculator for Fan Curve Contains the calculator for the Fan Curve |
| FanEnergyIndex.h | |
| FanShaftPower.h | |
| OptimalFanEfficiency.h | |
| Planar.h | |
| ► fast-cpp-csv-parser | |
| csv.h | |
| ► results | |
| InputData.h | |
| Results.h | Function prototypes for the PSAT and FSAT result fields |
| ► sqlite | |
| AtmosphereSpecificHeatData.h | |
| GasFlueGasMaterialData.h | |
| GasLoadChargeMaterialData.h | |
| LiquidLoadChargeMaterialData.h | |
| MotorData.h | |
| PumpData.h | |
| SolidLiquidFlueGasMaterialData.h | |
| SolidLoadChargeMaterialData.h | |
| SQLite.h | |
| sqlite3.h | |
| WallLossesSurfaceData.h | |
| ► ssmt | |
| ► api | |
| BoilerInput.h | |
| HeaderInput.h | |
| OperationsInput.h | |
| SteamModeler.h | |
| SteamModelerInput.h | |
| SteamModelerOutput.h | |
| TurbineInput.h | |
| ► domain | |
| BoilerFactory.h | |
| DeaeratorFactory.h | |
| EnergyAndCostCalculationsDomain.h | |
| FlashTankFactory.h | |
| FluidPropertiesFactory.h | |
| HeaderFactory.h | |
| HeatLossFactory.h | |
| HighPressureHeaderCalculationsDomain.h | |
| HighToMediumSteamTurbineCalculationsDomain.h | |
| InletFactory.h | |
| LowPressureFlashedSteamIntoHeaderCalculatorDomain.h | |
| LowPressureHeaderCalculationsDomain.h | |
| LowPressureVentedSteamCalculationsDomain.h | |
| MakeupWaterAndCondensateHeaderCalculationsDomain.h | |
| MakeupWaterVolumeFlowCalculationsDomain.h | |
| MediumPressureHeaderCalculationsDomain.h | |
| PowerBalanceCheckerCalculationsDomain.h | |
| ProcessSteamUsageCalculationsDomain.h | |
| PrvWithDesuperheatingFactory.h | |
| PrvWithoutDesuperheatingFactory.h | |
| ReturnCondensateCalculationsDomain.h | |
| SteamModelCalculationsDomain.h | |
| SteamModelerOutputFactory.h | |
| TurbineFactory.h | |
| ► service | |
| ► energy_and_cost | |
| EnergyAndCostCalculator.h | |
| ► high_pressure_header | |
| CondensingTurbineCalculator.h | |
| HighPressureCondensateCalculator.h | |
| HighPressureFlashTankCalculator.h | |
| HighPressureHeaderCalculator.h | |
| HighPressureHeaderModeler.h | |
| HighToLowSteamTurbineCalculator.h | |
| HighToMediumSteamTurbineCalculator.h | |
| ► low_pressure_header | |
| LowPressureCondensateCalculator.h | |
| LowPressureFlashedSteamIntoHeaderCalculator.h | |
| LowPressureHeaderCalculator.h | |
| LowPressureHeaderModeler.h | |
| LowPressurePrvCalculator.h | |
| ► medium_pressure_header | |
| HighToMediumPrvCalculator.h | |
| MediumPressureCondensateCalculator.h | |
| MediumPressureHeaderCalculator.h | |
| MediumPressureHeaderModeler.h | |
| MediumToLowPressureTurbineCalculator.h | |
| ReducedSteamException.h | |
| SteamBalanceCheckerService.h | |
| UnableToBalanceException.h | |
| ► power_balance | |
| LowPressureVentedSteamCalculator.h | |
| PowerBalanceChecker.h | |
| SteamBalanceCalculator.h | |
| SteamProductionCalculator.h | |
| SteamUseCalculator.h | |
| ► process_steam_usage | |
| ProcessSteamUsageModeler.h | |
| ► water-and-condensate | |
| MakeupWaterVolumeFlowCalculator.h | |
| ► water_and_condensate | |
| CombinedCondensateCalculator.h | |
| HeatExchangerCalculator.h | |
| MakeupWaterAndCondensateHeaderCalculator.h | |
| MakeupWaterAndCondensateHeaderModeler.h | |
| MakeupWaterCalculator.h | |
| MakeupWaterMassFlowCalculator.h | |
| ReturnCondensateCalculator.h | |
| DeaeratorModeler.h | |
| EnergyFlowCalculator.h | |
| MassFlowCalculator.h | |
| PrvCalculator.h | |
| RestarterService.h | |
| SteamBalanceException.h | |
| SteamModelCalculator.h | |
| SteamModelRunner.h | |
| SteamReducer.h | |
| TurbineCalculator.h | |
| Boiler.h | Calculator for boiler |
| Deaerator.h | Calculator for the deaerator for steam systems |
| FlashTank.h | Calculator for the flash tank for steam systems |
| Header.h | |
| HeatExchanger.h | |
| HeatLoss.h | Calculator for the heat loss for steam systems |
| PRV.h | Calculator for the steam properties after after a pressure drop for steam systems |
| SaturatedProperties.h | Calculator for saturated properties for steam systems |
| SteamProperties.h | |
| SteamSystemModelerTool.h | |
| Turbine.h | Calculator for turbines for steam systems |
| ► wasteWater | |
| WasteWater_Treatment.h | Contains the class definition for Bio-Tiger waste water treatment simulation |
| ▼ bindings | |
| ► steam | |
| SteamModelerInputDataMapper.h | |
| SteamModelerOutputDataMapper.h | |
| calculator.cpp | |
| calculator.h | |
| chillers.cpp | |
| chillers.h | |
| compressedAir.cpp | |
| compressedAir.h | |
| db.cpp | |
| db.h | |
| fan.cpp | |
| fan.h | |
| NanDataConverters.h | |
| phast.cpp | |
| phast.h | |
| processHeat.cpp | |
| processHeat.h | |
| psat.cpp | |
| psat.h | |
| ssmt.cpp | |
| ssmt.h | |
| standalone.cpp | |
| standalone.h | |
| svi.cpp | |
| svi.h | |
| wasteWater.cpp | |
| wasteWater.h | |
| ▼ CMakeFiles | |
| ► 3.15.3 | |
| ► CompilerIdC | |
| CMakeCCompilerId.c | |
| ► CompilerIdCXX | |
| CMakeCXXCompilerId.cpp | |
| ► 3.4.1 | |
| ► CompilerIdC | |
| CMakeCCompilerId.c | |
| ► CompilerIdCXX | |
| CMakeCXXCompilerId.cpp | |
| feature_tests.c | |
| feature_tests.cxx | |
| ▼ include | |
| ► calculator | |
| ► furnace | |
| EfficiencyImprovement.h | Calculator for fuel fired furnace |
| EnergyEquivalency.h | Calculator for energy equivalency for electric and fuel-fired furnaces |
| FlowCalculationsEnergyUse.h | Calculator for flow calculations energy use for fuel-fired furnaces |
| HumidityRatio.h | Calculator for the humidity ratio |
| O2Enrichment.h | Calculator for fuel fired furnace |
| ► losses | |
| Atmosphere.h | Calculator for heat required for atmosphere |
| AuxiliaryPower.h | Calculator for auxiliary power usage |
| EnergyInputEAF.h | Calculator for heat loss in an Electric Arc Furnace (EAF) |
| EnergyInputExhaustGasLosses.h | Calculator for energy input - exhaust gas losses for a non-EAF electric furnace |
| ExhaustGasEAF.h | Calculator for gas exhaust losses in an Electric Arc Furnace (EAF) |
| FixtureLosses.h | Calculator for heat loss due to fixtures, trays, conveyors |
| GasCoolingLosses.h | Calculator for total energy loss for gas, including air |
| GasFlueGasMaterial.h | Calculator for flue gas heat losses |
| GasLoadChargeMaterial.h | Calculator for total heat of gas load/charge material |
| LeakageLosses.h | Calculator for total energy loss for gas leakages |
| LiquidCoolingLosses.h | Calculator for heat losses due to liquid (not water) cooling |
| LiquidLoadChargeMaterial.h | Calculator for total heat of liquid load/charge material |
| LoadChargeMaterial.h | |
| OpeningLosses.h | Calculator for opening heat losses |
| SlagOtherMaterialLosses.h | Calculator for heat required for slag - other material losses |
| SolidLiquidFlueGasMaterial.h | |
| SolidLoadChargeMaterial.h | Calculator for total heat of solid load/charge material |
| WallLosses.h | Calculator for wall heat losses |
| WaterCoolingLosses.h | Calculator for heat losses due to water cooling |
| ► motor | |
| EstimateFLA.h | |
| MotorCurrent.h | |
| MotorData.h | |
| MotorEfficiency.h | |
| MotorPower.h | |
| MotorPowerFactor.h | |
| MotorShaftPower.h | MotorShaftPower class This contains the prototypes for the MotorShaftPower |
| OptimalMotorPower.h | |
| OptimalMotorShaftPower.h | |
| OptimalMotorSize.h | |
| Poles.h | |
| ► processHeat | |
| AirHeatingUsingExhaust.h | |
| ► pump | |
| FluidPower.h | |
| HeadTool.h | |
| MoverEfficiency.h | |
| OptimalDeviationFactor.h | |
| OptimalPrePumpEff.h | |
| OptimalPumpEfficiency.h | |
| OptimalPumpShaftPower.h | |
| OptimalSpecificSpeed.h | |
| OptimalSpecificSpeedCorrection.h | |
| PumpData.h | |
| PumpShaftPower.h | |
| ► util | |
| ► insulation | |
| ► objects | |
| AirProperties.h | |
| ► pipes | |
| InsulatedPipeCalculator.h | |
| InsulatedPipeInput.h | |
| InsulatedPipeOutput.h | |
| ► services | |
| ConvectiveHeatTransferCoefficient.h | |
| NusseltNumber.h | |
| RadiativeHeatTransferCoefficient.h | |
| RayleighNumber.h | |
| ReynoldsNumber.h | |
| ThermalResistance.h | |
| ► tanks | |
| InsulatedTankCalculator.h | |
| InsulatedTankInput.h | |
| InsulatedTankOutput.h | |
| AnnualCost.h | |
| AnnualEnergy.h | |
| CHP.h | |
| CompressedAir.h | |
| CompressedAirCentrifugal.h | |
| CompressedAirLeakSurvey.h | |
| CompressedAirPressureReduction.h | |
| CompressedAirReduction.h | |
| Conversion.h | |
| CurveFitVal.h | |
| ElectricityReduction.h | |
| NaturalGasReduction.h | |
| SludgeVolumeIndex.h | |
| SteamReduction.h | |
| WaterReduction.h | |
| ► chillers | |
| CoolingTower.h | |
| ► fans | |
| CompressibilityFactor.h | |
| Fan203.h | |
| FanCurve.h | Calculator for Fan Curve Contains the calculator for the Fan Curve |
| FanEnergyIndex.h | |
| FanShaftPower.h | |
| OptimalFanEfficiency.h | |
| Planar.h | |
| ► fast-cpp-csv-parser | |
| csv.h | |
| ► results | |
| InputData.h | |
| Results.h | Function prototypes for the PSAT and FSAT result fields |
| ► sqlite | |
| AtmosphereSpecificHeatData.h | |
| GasFlueGasMaterialData.h | |
| GasLoadChargeMaterialData.h | |
| LiquidLoadChargeMaterialData.h | |
| MotorData.h | |
| PumpData.h | |
| SolidLiquidFlueGasMaterialData.h | |
| SolidLoadChargeMaterialData.h | |
| SQLite.h | |
| WallLossesSurfaceData.h | |
| ► ssmt | |
| ► api | |
| BoilerInput.h | |
| HeaderInput.h | |
| OperationsInput.h | |
| SteamModeler.h | |
| SteamModelerInput.h | |
| SteamModelerOutput.h | |
| TurbineInput.h | |
| ► domain | |
| BoilerFactory.h | |
| DeaeratorFactory.h | |
| EnergyAndCostCalculationsDomain.h | |
| FlashTankFactory.h | |
| FluidPropertiesFactory.h | |
| HeaderFactory.h | |
| HeatLossFactory.h | |
| HighPressureHeaderCalculationsDomain.h | |
| HighToMediumSteamTurbineCalculationsDomain.h | |
| InletFactory.h | |
| LowPressureFlashedSteamIntoHeaderCalculatorDomain.h | |
| LowPressureHeaderCalculationsDomain.h | |
| LowPressureVentedSteamCalculationsDomain.h | |
| MakeupWaterAndCondensateHeaderCalculationsDomain.h | |
| MakeupWaterVolumeFlowCalculationsDomain.h | |
| MediumPressureHeaderCalculationsDomain.h | |
| PowerBalanceCheckerCalculationsDomain.h | |
| ProcessSteamUsageCalculationsDomain.h | |
| PrvWithDesuperheatingFactory.h | |
| PrvWithoutDesuperheatingFactory.h | |
| ReturnCondensateCalculationsDomain.h | |
| SteamModelCalculationsDomain.h | |
| SteamModelerOutputFactory.h | |
| TurbineFactory.h | |
| ► service | |
| ► energy_and_cost | |
| EnergyAndCostCalculator.h | |
| ► high_pressure_header | |
| CondensingTurbineCalculator.h | |
| HighPressureCondensateCalculator.h | |
| HighPressureFlashTankCalculator.h | |
| HighPressureHeaderCalculator.h | |
| HighPressureHeaderModeler.h | |
| HighToLowSteamTurbineCalculator.h | |
| HighToMediumSteamTurbineCalculator.h | |
| ► low_pressure_header | |
| LowPressureCondensateCalculator.h | |
| LowPressureFlashedSteamIntoHeaderCalculator.h | |
| LowPressureHeaderCalculator.h | |
| LowPressureHeaderModeler.h | |
| LowPressurePrvCalculator.h | |
| ► medium_pressure_header | |
| HighToMediumPrvCalculator.h | |
| MediumPressureCondensateCalculator.h | |
| MediumPressureHeaderCalculator.h | |
| MediumPressureHeaderModeler.h | |
| MediumToLowPressureTurbineCalculator.h | |
| ReducedSteamException.h | |
| SteamBalanceCheckerService.h | |
| UnableToBalanceException.h | |
| ► power_balance | |
| LowPressureVentedSteamCalculator.h | |
| PowerBalanceChecker.h | |
| SteamBalanceCalculator.h | |
| SteamProductionCalculator.h | |
| SteamUseCalculator.h | |
| ► process_steam_usage | |
| ProcessSteamUsageModeler.h | |
| ► water-and-condensate | |
| MakeupWaterVolumeFlowCalculator.h | |
| ► water_and_condensate | |
| CombinedCondensateCalculator.h | |
| HeatExchangerCalculator.h | |
| MakeupWaterAndCondensateHeaderCalculator.h | |
| MakeupWaterAndCondensateHeaderModeler.h | |
| MakeupWaterCalculator.h | |
| MakeupWaterMassFlowCalculator.h | |
| ReturnCondensateCalculator.h | |
| DeaeratorModeler.h | |
| EnergyFlowCalculator.h | |
| MassFlowCalculator.h | |
| PrvCalculator.h | |
| RestarterService.h | |
| SteamBalanceException.h | |
| SteamModelCalculator.h | |
| SteamModelRunner.h | |
| SteamReducer.h | |
| TurbineCalculator.h | |
| Boiler.h | Calculator for boiler |
| Deaerator.h | Calculator for the deaerator for steam systems |
| FlashTank.h | Calculator for the flash tank for steam systems |
| Header.h | |
| HeatExchanger.h | |
| HeatLoss.h | Calculator for the heat loss for steam systems |
| PRV.h | Calculator for the steam properties after after a pressure drop for steam systems |
| SaturatedProperties.h | Calculator for saturated properties for steam systems |
| SteamProperties.h | |
| SteamSystemModelerTool.h | |
| Turbine.h | Calculator for turbines for steam systems |
| ► wasteWater | |
| WasteWater_Treatment.h | Contains the class definition for Bio-Tiger waste water treatment simulation |
| ▼ src | |
| ► calculator | |
| ► furnace | |
| EfficiencyImprovement.cpp | Contains the implementation of the efficiency improvement calculator for fuel fired furnace |
| EnergyEquivalency.cpp | Contains the implementation of the energy equivalency calculator for both electrotechnology and fuel fired furnaces |
| FlowCalculationsEnergyUse.cpp | Contains the implementation of the flow calculations energy use for fuel fired furnace |
| HumidityRatio.cpp | Contains the implementation of the humidity ratio calculator |
| O2Enrichment.cpp | Contains the implementation of the O2 enrichment calculator for fuel fired furnace |
| ► losses | |
| Atmosphere.cpp | Contains the implementation of the atmosphere total heat |
| AuxiliaryPower.cpp | Contains the implementation of the Auxiliary Power - Heat Use |
| EnergyInputEAF.cpp | Contains the implementation of the energy input EAF loss calculator |
| ExhaustGasEAF.cpp | Contains the implementation of the Exhaust Gas EAF loss calculator |
| FixtureLosses.cpp | Contains the implementation of the fixture losses total heat |
| GasCoolingLosses.cpp | Contains the implementation of the gas cooling losses calculations |
| GasFlueGasMaterial.cpp | Contains the implementation of the flue gas loss calculations |
| LeakageLosses.cpp | Contains the implementation of the gas leakage losses calculations |
| LiquidCoolingLosses.cpp | Contains the implementation of the liquid (not water) cooling losses calculations |
| OpeningLosses.cpp | Contains the implementation of the opening leakage losses calculations |
| SlagOtherMaterialLosses.cpp | |
| SolidLiquidFlueGasMaterial.cpp | |
| WallLosses.cpp | Contains the implementation of the wall leakage losses calculations |
| WaterCoolingLosses.cpp | |
| ► motor | |
| EstimateFLA.cpp | |
| MotorCurrent.cpp | |
| MotorData.cpp | Contains the implementation of the MotorData calculator/table ORM class |
| MotorEfficiency.cpp | |
| MotorPower.cpp | |
| MotorPowerFactor.cpp | |
| MotorShaftPower.cpp | |
| OptimalMotorPower.cpp | |
| OptimalMotorShaftPower.cpp | |
| OptimalMotorSize.cpp | |
| Poles.cpp | |
| ► processHeat | |
| AirHeatingUsingExhaust.cpp | |
| ► pump | |
| HeadTool.cpp | |
| MoverEfficiency.cpp | |
| OptimalDeviationFactor.cpp | |
| OptimalPrePumpEff.cpp | |
| OptimalPumpEfficiency.cpp | |
| OptimalPumpShaftPower.cpp | |
| OptimalSpecificSpeed.cpp | |
| OptimalSpecificSpeedCorrection.cpp | |
| PumpData.cpp | |
| PumpShaftPower.cpp | |
| ► util | |
| ► insulation | |
| ► objects | |
| AirProperties.cpp | |
| ► pipes | |
| InsulatedPipeCalculator.cpp | |
| InsulatedPipeInput.cpp | |
| InsulatedPipeOutput.cpp | |
| ► services | |
| ConvectiveHeatTransferCoefficient.cpp | |
| NusseltNumber.cpp | |
| RadiativeHeatTransferCoefficient.cpp | |
| RayleighNumber.cpp | |
| ReynoldsNumber.cpp | |
| ThermalResistance.cpp | |
| ► tanks | |
| InsulatedTankCalculator.cpp | |
| InsulatedTankInput.cpp | |
| InsulatedTankOutput.cpp | |
| AnnualCost.cpp | |
| AnnualEnergy.cpp | |
| CHP.cpp | |
| CompressedAir.cpp | |
| CompressedAirCentrifugal.cpp | |
| CompressedAirLeakSurvey.cpp | |
| CompressedAirPressureReduction.cpp | |
| CompressedAirReduction.cpp | |
| Conversion.cpp | |
| CurveFitVal.cpp | |
| ElectricityReduction.cpp | |
| NaturalGasReduction.cpp | |
| SludgeVolumeIndex.cpp | |
| SteamReduction.cpp | |
| WaterReduction.cpp | |
| ► chillers | |
| CoolingTower.cpp | |
| ► fans | |
| FanCurve.cpp | |
| ► results | |
| Results.cpp | Contains the two main modules of PSATResult class and the FanResult class |
| ► sqlite | |
| SQLite.cpp | |
| ► ssmt | |
| ► api | |
| BoilerInput.cpp | |
| HeaderInput.cpp | |
| OperationsInput.cpp | |
| SteamModeler.cpp | |
| SteamModelerInput.cpp | |
| SteamModelerOutput.cpp | |
| TurbineInput.cpp | |
| ► domain | |
| BoilerFactory.cpp | |
| DeaeratorFactory.cpp | |
| FlashTankFactory.cpp | |
| FluidPropertiesFactory.cpp | |
| HeaderFactory.cpp | |
| HeatLossFactory.cpp | |
| InletFactory.cpp | |
| PrvWithDesuperheatingFactory.cpp | |
| PrvWithoutDesuperheatingFactory.cpp | |
| SteamModelerOutputFactory.cpp | |
| TurbineFactory.cpp | |
| ► service | |
| ► energy_and_cost | |
| EnergyAndCostCalculator.cpp | |
| ► high_pressure_header | |
| CondensingTurbineCalculator.cpp | |
| HighPressureCondensateCalculator.cpp | |
| HighPressureFlashTankCalculator.cpp | |
| HighPressureHeaderCalculator.cpp | |
| HighPressureHeaderModeler.cpp | |
| HighToLowSteamTurbineCalculator.cpp | |
| HighToMediumSteamTurbineCalculator.cpp | |
| ► low_pressure_header | |
| LowPressureCondensateCalculator.cpp | |
| LowPressureFlashedSteamIntoHeaderCalculator.cpp | |
| LowPressureHeaderCalculator.cpp | |
| LowPressureHeaderModeler.cpp | |
| LowPressurePrvCalculator.cpp | |
| ► medium_pressure_header | |
| HighToMediumPrvCalculator.cpp | |
| MediumPressureCondensateCalculator.cpp | |
| MediumPressureHeaderCalculator.cpp | |
| MediumPressureHeaderModeler.cpp | |
| MediumToLowPressureTurbineCalculator.cpp | |
| ReducedSteamException.cpp | |
| SteamBalanceCheckerService.cpp | |
| UnableToBalanceException.cpp | |
| ► power_balance | |
| LowPressureVentedSteamCalculator.cpp | |
| PowerBalanceChecker.cpp | |
| SteamBalanceCalculator.cpp | |
| SteamProductionCalculator.cpp | |
| SteamUseCalculator.cpp | |
| ► process_steam_usage | |
| ProcessSteamUsageModeler.cpp | |
| ► water_and_condensate | |
| CombinedCondensateCalculator.cpp | |
| HeatExchangerCalculator.cpp | |
| MakeupWaterAndCondensateHeaderCalculator.cpp | |
| MakeupWaterAndCondensateHeaderModeler.cpp | |
| MakeupWaterCalculator.cpp | |
| MakeupWaterMassFlowCalculator.cpp | |
| MakeupWaterVolumeFlowCalculator.cpp | |
| ReturnCondensateCalculator.cpp | |
| DeaeratorModeler.cpp | |
| EnergyFlowCalculator.cpp | |
| MassFlowCalculator.cpp | |
| PrvCalculator.cpp | |
| RestarterService.cpp | |
| SteamBalanceException.cpp | |
| SteamModelCalculator.cpp | |
| SteamModelRunner.cpp | |
| SteamReducer.cpp | |
| TurbineCalculator.cpp | |
| Boiler.cpp | Contains the implementation of the boiler calculator for steam systems |
| Deaerator.cpp | Contains the implementation of the deaerator calculator for steam systems |
| FlashTank.cpp | Contains the implementation of the flash tank calculator for steam systems |
| Header.cpp | |
| HeatLoss.cpp | Contains the implementation of the heat loss calculator for steam systems |
| PRV.cpp | Contains the implementation of the PRV calculator for steam systems |
| SaturatedProperties.cpp | Contains the implementation of the saturated properties calculator for steam systems |
| SteamProperties.cpp | |
| SteamSystemModelerTool.cpp | |
| Turbine.cpp | |
| ► wasteWater | |
| WasteWater_Treatment.cpp | Logic to calculate wast water treatment results |
| WasteWaterTreatment_Mosen.cpp | Contains the implementation of Bio-Tiger, waste water treatment simulation |
| arch.c | |
| main.cpp |
1.8.13
